Oce ColorStream - Page 272

#
See section ...Cleaning location
‘Replacing the corotron — overview’ on page 412Corotron slide-in unit
If there is a corresponding error message:
#
See section ...Cleaning location
If unfused paper has been moved through the pa-
per output
or
If there are still bits of paper in the printing system
following a paper tear:
‘Cleaning the Paper Path’ on page 289
Paper path
If there may still be bits of paper in the printing
system following a paper tear:
‘Checking the Paper Path’ on page 296
‘Replacing the cleaning felt’ on page 448Toner suction system
If dirty:
#
See section ...Cleaning location
‘Cleaning the Surface of the Printing System’ on page
307
Surfaces of the printing system
‘Cleaning the replacement cart for developer stations
(option)’ on page 308
Maintenance cart for developer
stations (optional)
‘Cleaning the Developer Station Shelf (Optional)’
on page 309
Movable developer station shelf
(optional)
Chapter 7 - Cleaning the Printing System272
Cleaning Agents and Cleaning Intervals