Proceed as follows:
Caution
■
There can be a high build-up of static charge when vacuuming the toner
spill.
When vacuuming, always use an explosion-proof industrial vacuum cleaner
with a grounded suction tube, rubber nozzle and filter set for fine dust.
■
When vacuuming the toner, do not scratch the rollers.
Use only a rubber attachment on the vacuum cleaner.
Vacuum the toner from the
housing and guide rails using the
vacuum cleaner.
4.
Vacuum the entire width of the
photoconductor belt suction slot.
5.
Caution
Do not damage roller.
Carefully hold the suction profile using both hands.
Chapter 7 - Cleaning the Printing System276
Cleaning Developer Station Surface
To Next Page
Loading...
