Oce ColorStream - Page 315

Toner bottle with 1 kg (2.2 lb):
1
2
3
4
#
DescriptionComponent
Transponder1
Toner bottle2
Reader3
Toner bottle holder4
Description
If a toner bottle with the proper toner type is identified, toner is drawn from the toner
bottle into the toner boxes of the assigned developer stations.
To avoid printing a print job with the wrong color or an unknown toner, the printing
process is stopped when printing starts if:
■
a toner bottle with an incorrect toner type is identified. A message is displayed on the
operator panel notifying the operator that the toner bottle must be replaced by a toner
bottle with the correct toner type.
■
the toner bottle cannot be identified at all (because either no toner bottle is inserted
or the transponder on the toner bottle is faulty or missing, or the reader is faulty). A
Chapter 8 - Replacing Consumables 315
Toner Bottle Identification with Océ TonerSafe