message is displayed on the operator panel listing several possible ways to remedy the
situation.
#
Caution
If desired, TonerSafe can be permanently turned off. Although not recommend-
ed, disabling TonerSafe will enable the printing system to use toner that is not
best suited to the developer stations, such as non-Océ approved toner. The
operator will be warned if the toner cannot be verified and given the choice
to continue or try a new bottle.
If the operator confirms that printing should continue, toner continues to be
drawn from the toner bottle into the toner boxes of the assigned developer
stations. This may result in toner of the wrong color being sucked in, which
will result in considerable soiling of the toner suction system and the developer
stations. Damage to the printing system cannot be ruled out in this case.
Customers wishing to disable TonerSafe should notify Service in accordance
with the instructions in the 'Service ticket' menu.
Chapter 8 - Replacing Consumables316
Toner Bottle Identification with Océ TonerSafe
To Next Page
Loading...
