Proceed as follows:
Resume printing. The procedure depends on whether information was lost or
not when printing stopped:
■
Print stop without loss of information: The printing system has stopped at
the start of a page.
Click on the 'Ready' button.
The printing operation is continued without any impairment to print or
fusing quality.
■
Print stop with loss of information: To avoid damage, the printing system
stopped immediately and therefore stopped in the middle of a page.
Click on the 'Ready' button.
The print image on the damaged print pages is fused to ensure that the
tension roller and post-processing are not soiled. Alternately, you can move
the damaged pages from the printing system by pressing the 'Eject' button.
Restart print job.
5.
Result
Inform Service according to the information in the 'Service ticket' menu, if:
■
the error cannot be eliminated,
■
the same error recurs repeatedly,
■
the printing system cannot be rendered operational after the error has been eliminated.
Chapter 10 - Correcting Errors478
Processing messages on the operator panel
To Next Page
Loading...
