Blistering and Offsetting Heat
#
CorrectionPossible Cause
Reduce the fusing temperature in the
'Print image' -> 'Fusing temperature'
menu.
Detailed information on this menu is
available from the context-sensitive direct
help. To go to this, call up the 'Print im-
age' menu and press the F1 button.
Blistering
Due to the heat generated when
preprinting paper, water can run from the
color and lead to air bubbles.
Offsetting heat
Toner residue on the roller is noticeable
on the print image.
Chapter 10 - Correcting Errors 489
Correcting Print Image Errors
To Next Page
Loading...
