• Press [Load].
The list of presets contains standard and custom presets. You can also use a standard
preset as a starting point to create new presets.
• Select one of the standard presets.
• Press [Done].
• Select [Advanced mode] and examine the changed CMYK tone curves.
• Touch [Reset] to restore the original CMYK tone curves.
7. Apply a correction with one of the CMYK sliders.
• Touch and move the [Yellow] slider. You can also use the + and - buttons.
• The combined control, below the [Black] slider, changes all sliders at the same time. Touch
the + and - buttons to adjust the combined control.
• Touch [Reset] to restore the original CMYK tone curves.
8. Apply a correction with the contrast slider.
Explore the pixel-precise preview
182
Chapter 8 - Document printing
To Next Page
Loading...
