Parker AC30 series User Manual

A-9 Modbus TCP
AC30V series Variable Speed Drive
0942
Modbus Trip Enable
Type: BOOL
Default: FALSE
Base Communications Modbus TCP parameter.
Set TRUE to enable the Modbus Trip. The parameter Modbus Timeout must be set to a value other than zero
Range Writable Saved Config
FALSE
TRUE
  
1241
Open Connections
Type: USINT
Base Communications Modbus TCP parameter.
Indicates the number of open connections to the AC30V Modbus TCP server.
Range Writable Saved Config
0
…
3
  
0943
Process Active
Type: BOOL
Base Communications Modbus TCP parameter.
Indicates that a Modbus request addressed to this node has been received within the period set by the parameter Modbus Timeout, or
if no timeout is specified, this parameter will stay active after the first received Modbus request.
Range Writable Saved Config
FALSE
TRUE
  
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485