PREVOST LE MIRAGE XLII BUS SHELLS User Manual

Section 26: XLII SLIDE-OUT
PA1553
34
FIGURE 71 : SLIDING WINDOW - SIKA AKTIVATOR
FIGURE 72 : SLIDING WINDOW - SIKA AKTIVATOR
FIGURE 73: AWNING WINDOW – SIKA 252 APPLICATION
FIGURE 74 : CORRECT TIGHTENING SEQUENCE
FIGURE 75 : SLIDING WINDOW – SEAL THE UPPER
CORNERS
FIGURE 76 : SEAL
16.11 FINISHING JOINT
The following procedure applies to section
16.11.1 up to 16.11.4.
For surface cleaning and preparation, tools,
cleaner, adhesives and other product needed,
refer to the MTH side panel installation
procedure described in section 18: BODY.
1. Place masking tape to protect surfaces from
smudge.
2. Apply Sika 221.

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English