PREVOST LE MIRAGE XLII BUS SHELLS User Manual

FAULT CODE MANUAL Created on 00-04-25 15:30
- 5 -
4. Display menus
The image below displays the main menus in the display window. The window can only
display three items at once, therefore the up/down button on the windscreen wiper handle
must be used to browse through the menus. Simply press the “Return” button on the
windscreen wiper handle to enter a desired menu. If you wish to return to the level above
just press the “Esc” button on the windscreen wiper handle.
5. Setting the display language
Turn on the ignition on the bus. The display at the lower left corner of the instrument can
display an icon of some sort depending on the bus status. If this is the case then press
“Esc” on the windscreen wiper handle to go to the main menu. If the language of the
display is not English we recommend that you change the language settings of the
display. This is done by entering the set-up mode in the display menu. Simply use the
up/down button on the windscreen wiper handle and press the “Return” button when the
text “Set-up mode” is highlighted. The display now changes to display the submenus to
the “Set-up mode” menu. Klick the up/down button to highlight the text “Language” if it
is not alreadey highlighted. Press the “Return” button again to enter the choices of
languages, select “English” and press the “Return” button once more.

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English