PREVOST LE MIRAGE XLII BUS SHELLS User Manual

Section 18: BODY
PA1553
30
Were the shipping blocks in place during installation?
C: Failure to remove the shipping blocks after installation can create interference between sash and
frame.
Have the shipping blocks been removed after installation?
D: The window is misaligned or not installed squarely.
Is there interference with any coach parts?
Is there proper clearance between the bottom of the outer glass and the belt-line trim /
seal?
Check for missing parts or
misaligned parts
A: The frame and sash are misaligned.
Is there any interference between the sash and frame?
Is there clearance between the sash and the rocker switch covers?
B: Releasing bar guides are missing.
Check that the releasing bar guides are installed. There should be 4 installed on H win-
dows, and 3 installed on XL2 windows.
6.2.4 Electric Sliding Windows
FIGURE 21: ELECTRIC SLIDING WINDOW EXPLODED VIEW
Sash Removal
1. Remove the Screen Assembly
2. Pull down on both release latches simultaneously and rotate the sash inwards approximately 10
degrees.(Figure 22)

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English