PREVOST LE MIRAGE XLII BUS SHELLS User Manual

Section 18: BODY
PA1553
31
FIGURE 22: REMOVING THE SASH
3. Lift the sash up and out to disengage the bottom of the sash from the window frame. (Figure 23)
FIGURE 23: DISENGAGING THE BOTTOM OF THE SASH
Installation
1. Align the leading edge of the slot on the lower cam follower block with the sash stop. Use the power
toggle switch to obtain the correct alignment. (Figure 24)

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English