PREVOST LE MIRAGE XLII BUS SHELLS User Manual

Section 18: BODY
PA1553
33
FIGURE 26: RELEASE LATCH PROPER POSITION
7. * Failure to confirm this step may lead to the sash becoming disengaged with the frame and could
result in personal injury.
8. Operate the window to confirm that it opens and closes properly.
Install the screen assembly.
6.3 ZONE 3
FIGURE 27: ZONE 3
6.3.1 Rear Cap
The fiberglass rear cap does not need any
maintenance except painting as needed. It is
held in place with adhesive. If ever it has to be
replaced, make an appointment at a Prévost
service center near you.
For minor damages, refer to Paragraph 4
"Common Fiberglass Repair Procedure" and
Paragraph 5 "Common Painting Procedure".
6.3.2 Engine Compartment Doors
 Engine Compartment Doors Adjustment
Correct Position
Incorrect Position

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English