EasyManuals Logo

PREVOST LE MIRAGE XLII BUS SHELLS User Manual

PREVOST LE MIRAGE XLII BUS SHELLS
1342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1339 background imageLoading...
Page #1339 background image
Section 26: XLII SLIDE-OUT
PA1553
45
PROBLEM CAUSE CORRECTIVE ACTION
Knocking sound when
parking brake is released
A. Security pin retracts too rapidly; A. Adjust security pin air flow
regulator.
Inflatable seal damaged or
removed, or wiper seal
unstuck from the
structure.
A. Slide-out has been retracted or extended
with the manual procedure with the
inflatable seal not deflated;
B. Pressure transducer malfunction;
C. Faulty roof reinforcing rod adjustment;
D. Seal valve malfunction;
E. Excessive load in the slide-out;
F. Slide-out not centered in the structure
opening;
A. Always deflate the seal when
manually retracting or extending
the slide-out.
B. Check the pressure transducer
condition, replace if necessary.
C. Readjust the roof reinforcing rod.
D. Check the seal valve condition.
E. Reduce load or distribute load
evenly in order to respect the
deflection criterion and slide-out
load capacity.
F. Readjust the slide-out height and
center horizontally in opening.
Friction at end of travel
when in full OUT position
or at beginning of
retraction
A. Interference between upper structure key
and upper inner stopper;
A. Readjust the upper inner stopper.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PREVOST LE MIRAGE XLII BUS SHELLS and is the answer not in the manual?

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General IconGeneral
BrandPREVOST
ModelLE MIRAGE XLII BUS SHELLS
CategoryBuses
LanguageEnglish

Related product manuals