PREVOST LE MIRAGE XLII BUS SHELLS User Manual

FAULT CODE MANUAL Created on 00-04-25 15:30
- 7 -
As in the example above, you can see that the fault code is set in MID 130, the SID
number is 191 and the FMI number is 2. By looking at the fault code table for MID 130
(which represents the TECU) you can see that SID number 191 means “Output speed
level error” as well as the displaytext shown if your dipsplay would have been set to show
faults in text mode.
The information about the PID number (or SID, PPID or PSID) together with the
explanation of the FMI number associated with the fault might help you to draw a
conclusion of what may have caused the error. The image below shows the FMI table
which tells what type of fault the FMI number represents.
In this case the information MID 130, PID 191, FMI 2 means that the output shaft speed
has retrieved intermittent or incorrect data, this gives an initial position to start the fault
tracing from. Future revisions of this manual will contain more clearly instructions of
how to fix the errors.

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English