PREVOST LE MIRAGE XLII BUS SHELLS User Manual

Page No.6
Manual No. NDS1 Issue A
Spicer SpecialityAxle Division - Technical Publications
ALWAYS USE GENUINE
SPICERSPICER
SPICERSPICER
SPICER
®®
®®
®
SPARE PARTS!
GENUINE SPICER SERVICE PARTS
Should an axle assembly require replacement component parts, it is recommended that
Spicer Speciality Axle Division service parts be used. Spicer Speciality Axle Division service
parts are manufactured under the same rigid specification as are the original equipment axle
components. This assures the customer who uses genuine Spicer Speciality Axle Division
service parts, maximum reliability for a Spicer Speciality Axle Division assembly.
Spicer Speciality Axle Division service parts are available through either your vehicle
manufacturer or through Spicer Speciality Axle Division spares department.
The use of non Spicer service parts may cause premature component failure and void the
warranty.
The items included in the spare parts section of this manual are currently available as
service spare parts at the time of printing.
The part numbers and illustrations are provided specifically as a guide only.
ORDERING SPARE PARTS
In order to assist our spares department when ordering spare parts for your NDS range axle,
please have the following information to hand.
1. Axle type
2. Axle list number
3. serial number
These can be found on the axle nameplate situated on the front of the axle bed as shown
below:-
TYPE
SERIAL No.
LIST No.
CUST. REF.
MANUFACTURED IN THE UNITED KINGDOM
SPICER SPECIALITY
AXLE DIVISION
SPICER
®

NDS56
0001
26227
ABCDEF 1
typical example
of nameplate

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English