R&S ESR Series User Manual

Remote Control
R&S
®
ESR
965User Manual 1175.7068.02 ─ 12
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?
This command queries the name of the first printer (in the list of printers) available
under Windows operating system.
The names of other installed printers can be queried with the SYSTem:COMMunicate:
PRINter:ENUMerate[:NEXT]? command.
If no printer is configured an empty string is output.
Return values:
<PrinterName> *RST: NONE
Example:
SYST:COMM:PRIN:ENUM:FIRS?
Usage: Query only
Manual operation: See "Device Setup" on page 544
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?
This command queries the name of the next printer installed under Windows operating
system. After all available printer names have been output, an empty string enclosed
by quotation marks (") is output for the next query. Further queries are answered by a
query error.
The SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt? command should be
sent previously to return to the beginning of the printer list and query the name of the
first printer.
Example:
SYST:COMM:PRIN:ENUM?
Usage: Query only
Manual operation: See "Device Setup" on page 544
SYSTem:COMMunicate:PRINter:SELect <1|2> <PrinterName>
This command selects one of the printers configured under Windows operating sys-
tem, including the associated output destination.
The specified printer name must be a string (entered in quotes) as returned by the
commands
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt? or
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?
The HCOPy:DESTination<1|2> on page 960 command is used to select an output
medium other than the default one.
Parameters:
<PrinterName> "<printer_name>"
*RST: NONE
Example:
SYST:COMM:PRIN:SEL "LASER on LPT1"
Documentation

R&S ESR Series Specifications

General

Brand	R&S
Model	ESR Series
Category	Receiver
Language	English