Rockwell Automation Publication 2198-UM002L-EN-P - October 2021 13
Preface
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
Table 1 - Additional Resources
Resource Description
Kinetix Rotary Motion Specifications Technical Data, publication KNX-TD001
Provides product specifications for Kinetix VPL, VPC, VPF, VPH, and VPS motors, Kinetix MPL,
MPM, MPF, and MPS motors, and Kinetix HPK rotary motors.
Kinetix Linear Motion Specifications Technical Data, publication KNX-TD002
Provides product specifications for Kinetix MPAS and MPMA linear stages, Kinetix VPAR,
MPAR, and MPAI electric cylinders, Kinetix LDAT linear thrusters, and Kinetix LDC linear
motors.
Kinetix 5700, 5500, 5300, and 5100 Servo Drives Specifications Technical
Data, publication KNX-TD003
Provides product specifications for Kinetix Integrated Motion over the EtherNet/IP network,
Integrated Motion over sercos interface, EtherNet/IP networking, and component servo drive
families
Kinetix Rotary and Linear Motion Accessories Specifications Technical Data,
publication KNX-TD004
Provides product specifications for Kinetix 2090 motor and interface cables, low-profile connector kits,
drive power components, and other servo drive accessory items.
Kinetix 3, 300, 350, 2000, 6000, 6200, 6500, 7000 Servo Drives Specifications,
publication KNX-TD005
Provides product specifications for Kinetix Integrated Motion over the EtherNet/IP network
(Kinetix 6500 and Kinetix 350), Integrated Motion over Sercos interface (Kinetix 6200, Kinetix
6000, Kinetix 2000, and Kinetix 7000), and component (Kinetix 3) servo drive families.
Kinetix 5700 Safe Monitor Functions Safety Reference Manual,
publication 2198-RM001
Provides a description of integrated stopping functions and safe monitoring functions with
a GuardLogix® controller and Kinetix 5700 servo drives.
iTRAK System User Manual, publication 2198T-UM001
Provides information on how to install the Kinetix 5700 iTRAK power supply with an iTRAK
system and program the iTRAK system.
iTRAK System with TriMax Bearings User Manual, publication 2198T-UM002
iTRAK 5730 System User Manual, publication 2198T-UM003
1321 Power Conditioning Products Technical Data, publication 1321-TD001
Provides information on typical use cases, specifications, terminations, and dimensions of
Bulletin 1321 line reactors.
System Design for Control of Electrical Noise Reference Manual,
publication GMC-RM001
Provides information, examples, and techniques designed to minimize system failures
caused by electrical noise.
Servo Drive Installation Best Practices Application Technique,
publication MOTION-AT004
Best practice examples to help reduce the number of potential noise or electromagnetic
interference (EMI) sources in your system and to make sure that the noise sensitive
components are not affected by the remaining noise.
Kinetix 5700 Drive Systems Design Guide, publication KNX-RM010
System design guide to select the required (drive specific) drive module, power accessory,
feedback connector kit, and motor cable catalog numbers for your Kinetix 5700 drive
system.
Motor Nameplate Datasheet Entry for Custom Motor Applications Application
Technique, publication 2198-AT002
Provides information on the use of nameplate data entry for custom induction motors and
permanent-magnet motors that are used in applications with Kinetix 5700 servo drives.
Vertical Load and Holding Brake Management Application Technique,
publication MOTION-AT003
Provides information on vertical loads and how the servo motor holding-brake option can be
used to help keep a load from falling.
Motion System Tuning Application Technique, publication MOTION-AT005
Provides information on tuning a Kinetix drive system.
Integrated Motion on the EtherNet/IP Network Configuration and Startup
User Manual, publication MOTION-UM003
Provides information on configuring and troubleshooting your ControlLogix® and
CompactLogixâ„¢ EtherNet/IP network modules.
Integrated Motion on the EtherNet/IP Network Reference Manual,
publication MOTION-RM003
Provides information on the AXIS_CIP_DRIVE attributes and the Studio 5000 Logix Designer
application Control Modes and Methods.
GuardLogix 5570 Controllers User Manual, publication 1756-UM022
Provides information on how to install, configure, program, and use ControlLogix controllers
and GuardLogix controllers in Studio 5000 Logix Designer projects.
GuardLogix 5580 Controllers User Manual, publication 1756-UM543
Compact GuardLogix 5370 Controllers User Manual, publication 1769-UM022
Provides information on how to install, configure, program, and use CompactLogix and
Compact GuardLogix controllers.
Compact GuardLogix 5380 Controllers User Manual, publication 5069-UM001
GuardLogix 5570 and Compact GuardLogix 5370 Controller Systems Safety
Reference Manual, publication 1756-RM099
Provides information on how to achieve and maintain Safety Integrity Level (SIL) and
Performance Level (PL) safety application requirements for GuardLogix and Compact
GuardLogix controllers.
GuardLogix 5580 and Compact GuardLogix 5380 Controller Systems Safety
Reference Manual, publication 1756-RM012
Motion Analyzer System Sizing and Selection Tool
website https://motionanalyzer.rockwellautomation.com/
Comprehensive motion application sizing tool used for analysis, optimization, selection, and
validation of your Kinetix Motion Control system.
EtherNet/IP Network Devices User Manual, ENET-UM006
Describes how to configure and use EtherNet/IP devices to communicate on the EtherNet/IP
network.
Ethernet Reference Manual, ENET-RM002
Describes basic Ethernet concepts, infrastructure components, and infrastructure features.
CIP Security with Rockwell Automation Products Application Technique,
publication SECURE-AT001
.
Provides information on CIP Security, including which Rockwell Automation products
support CIP Security.
System Security Design Guidelines Reference Manual, SECURE-RM001
Provides guidance on how to conduct security assessments, implement Rockwell
Automation products in a secure system, harden the control system, manage user access,
and dispose of equipment.
To Next Page
Loading...
Need help?
General
