Rockwell Automation Allen-Bradley Kinetix 5700 User Manual

372 Rockwell Automation Publication 2198-UM002L-EN-P - October 2021
Appendix B Upgrade the Drive Firmware
Verify the Firmware
Upgrade
Follow these steps to verify your firmware upgrade was successful.
1. Open your RSLinx software.
2. From the Communications menu, choose RSWho.
3. Expand your Ethernet node, Logix backplane, and EtherNet/IP network
module.
4. Right-click the drive module and choose Device Properties.
The Device Properties dialog box appears.
5. Verify the new firmware revision level.
6. Click Close.
Verifying the firmware upgrade is optional.

Rockwell Automation Allen-Bradley Kinetix 5700 Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley Kinetix 5700
Category	Servo Drives
Language	English