Rockwell Automation Publication 2198-UM002L-EN-P - October 2021 223
Chapter 6 Configure and Start the Kinetix 5700 Drive System
See Configure Axis Properties beginning on page 246 for configuration
examples.
10. Review other categories in the Controller Organizer and make changes
as needed for your application.
11. Click OK.
See Auxiliary Feedback Specifications
on page 114 for more information on
auxiliary feedback signals and Allen-Bradley auxiliary feedback encoders
available for use.
Configure Induction-motor
Frequency-control Axis
Properties
Follow these steps to configure induction-motor axis properties for various
frequency control methods.
General and Motor Categories
1. In the Controller Organizer, right-click an axis and choose Properties.
2. Select the General category.
The General dialog box appears.
3. From the Axis Configuration pull-down menu, choose Frequency
Control.
4. From the Feedback Configuration pull-down menu, choose No Feedback.
5. From the Module pull-down menu, choose the drive to associate with
your Frequency Control (induction motor) axis.
The Module Type and Power Structure fields populate with the chosen
drive catalog number.
6. Click Apply.
To Next Page
Loading...
