Rockwell Automation Allen-Bradley Kinetix 5700 User Manual

Rockwell Automation Publication 2198-UM002L-EN-P - October 2021 423
Appendix F Motor Control Feature Support
Configure the Axis for SLAT
Follow these steps to configure the SLAT attributes.
1. In the Controller Organizer, right-click an axis and choose Properties.
2. Select the General category.
The General dialog box appears.
3. From the Axis Configuration pull-down menu, choose Velocity Loop.
The Velocity Loop dialog box appears.
4. Enter values for the Velocity Loop attributes appropriate for your
application.
5. Click Apply.

Rockwell Automation Allen-Bradley Kinetix 5700 Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley Kinetix 5700
Category	Servo Drives
Language	English