SeaDoo 3D - Page 227

Section07ELECTRICALSYSTEM
Subsection 05 (DIGITALLY ENCODED SECURITY SYSTEM (DESS))
smr2005-072-001_en
Install key on MPI DESS post.
smr2005-072-002
Click on ADD KEY button on bottom of screen.
smr2005-072-003_Aen
1. Clickonthistab
A new key is now saved in the computer.
NOTE: To program other key(s), install a new key
on MPI DESS post and click again on ADD KEY
tab.
Ensure to save new data in MPEM using WRITE
DATA button.
787 RFI Engines
Locate communication connector in bilge.
smr2005-055-006_a
3D MODELS
smr2005-055-005_a
GTI RFI MODELS
Unplug communication connector and plug VCK
connector.
Connect the safety lanyard to the DESS post to
activate the communication.
Ensure that the protocol “kW2000” is properly se-
lected.
A33C5LA
216 smr2005-072
www.SeaDooManuals.net