[scdevpmu-210415, 1, en_US]
Figure 9-18 Changing the PMU Setting Values via the Device Display
You can also change the communication settings in the same way. To do this, select the corresponding
communication port in the Communication menu on the device display. From the Channel 1 menu item, you
can then access the detailed setting options for the IP or PMU communication settings (see Figure 9-19).
[sccompmu, 1, en_US]
Figure 9-19
Changing the Communication Setting Values Via the Device Display
Measured Values, Energy Values, and Supervision of the Primary System
9.5 Phasor Measurement Unit (PMU)
1016 SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
