[sc_change_edition, 1, en_US]
Figure 6-148 Changing the IEC 61850 Edition
•
Confirm the conversion to IEC 61850 Edition 2 with
Yes
.
Step 2
•
Copy the 1st device as many times as are needed for the parallel transformers. The copied devices
contain the same settings.
•
Adapt the IP addresses of the copied devices in the project tree under Hardware and protocols.
Control Functions
6.9 Voltage Controller
SIPROTEC 5, High-Voltage Bay Controller, Manual 479
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
