Siemens 6MD86 - Page 678

Addr. Parameter C Setting Options Default Setting
_:8132:16 Definite-T 2:Threshold 1 A @ 100 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 100 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 50 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 50 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 1.6 Irated 0.001 A to 1.600 A 2.000 A
5 A @ 1.6 Irated 0.005 A to 8.000 A 10.000 A
_:8132:22 Definite-T 2:Operate
delay
0.00 s to 60.00 s 0.10 s
Dyn.s: AR cycle>3
_:8132:32 Definite-T 2:Effected by
AR cycle gr. 3
•
no
•
yes
no
_:8132:39 Definite-T 2:Stage
blocked
•
no
•
yes
no
_:8132:17 Definite-T 2:Threshold 1 A @ 100 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 100 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 50 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 50 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 1.6 Irated 0.001 A to 1.600 A 2.000 A
5 A @ 1.6 Irated 0.005 A to 8.000 A 10.000 A
_:8132:23 Definite-T 2:Operate
delay
0.00 s to 60.00 s 0.10 s
Dyn.s: Cold load PU
_:8132:33 Definite-T 2:Effect. b.
cold-load pickup
•
no
•
yes
no
_:8132:40 Definite-T 2:Stage
blocked
•
no
•
yes
no
_:8132:18 Definite-T 2:Threshold 1 A @ 100 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 100 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 50 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 50 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 1.6 Irated 0.001 A to 1.600 A 2.000 A
5 A @ 1.6 Irated 0.005 A to 8.000 A 10.000 A
_:8132:24 Definite-T 2:Operate
delay
0.00 s to 60.00 s 0.10 s
Dyn.set: bin.input
_:8132:34 Definite-T 2:Effected by
binary input
•
no
•
yes
no
_:8132:41 Definite-T 2:Stage
blocked
•
no
•
yes
no
_:8132:19 Definite-T 2:Threshold 1 A @ 100 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 100 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 50 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 50 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 1.6 Irated 0.001 A to 1.600 A 2.000 A
5 A @ 1.6 Irated 0.005 A to 8.000 A 10.000 A
_:8132:25 Definite-T 2:Operate
delay
0.00 s to 60.00 s 0.10 s
Protection and Automation Functions
7.6 Directional Overcurrent Protection, Phases
678 SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017