Siemens 6MD86 - Page 677

Addr. Parameter C Setting Options Default Setting
_:8132:3 Definite-T 2:Threshold 1 A @ 100 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 100 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 50 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 50 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 1.6 Irated 0.001 A to 1.600 A 2.000 A
5 A @ 1.6 Irated 0.005 A to 8.000 A 10.000 A
_:8132:4 Definite-T 2:Dropout
ratio
0.90 to 0.99 0.95
_:8132:101 Definite-T 2:Dropout
delay
0.00 s to 60.00 s 0.00 s
_:8132:6 Definite-T 2:Operate
delay
0.00 s to 60.00 s 0.10 s
Dyn.s: AR off/n.rdy
_:8132:28 Definite-T 2:Effect. by AR
off/n.ready
•
no
•
yes
no
_:8132:35 Definite-T 2:Stage
blocked
•
no
•
yes
no
Dyn.set: AR cycle 1
_:8132:29 Definite-T 2:Effected by
AR cycle 1
•
no
•
yes
no
_:8132:36 Definite-T 2:Stage
blocked
•
no
•
yes
no
_:8132:14 Definite-T 2:Threshold 1 A @ 100 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 100 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 50 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 50 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 1.6 Irated 0.001 A to 1.600 A 2.000 A
5 A @ 1.6 Irated 0.005 A to 8.000 A 10.000 A
_:8132:20 Definite-T 2:Operate
delay
0.00 s to 60.00 s 0.10 s
Dyn.set: AR cycle 2
_:8132:30 Definite-T 2:Effected by
AR cycle 2
•
no
•
yes
no
_:8132:37 Definite-T 2:Stage
blocked
•
no
•
yes
no
_:8132:15 Definite-T 2:Threshold 1 A @ 100 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 100 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 50 Irated 0.030 A to 35.000 A 2.000 A
5 A @ 50 Irated 0.150 A to 175.000 A 10.000 A
1 A @ 1.6 Irated 0.001 A to 1.600 A 2.000 A
5 A @ 1.6 Irated 0.005 A to 8.000 A 10.000 A
_:8132:21 Definite-T 2:Operate
delay
0.00 s to 60.00 s 0.10 s
Dyn.set: AR cycle 3
_:8132:31 Definite-T 2:Effected by
AR cycle 3
•
no
•
yes
no
_:8132:38 Definite-T 2:Stage
blocked
•
no
•
yes
no
Protection and Automation Functions
7.6 Directional Overcurrent Protection, Phases
SIPROTEC 5, High-Voltage Bay Controller, Manual 677
C53000-G5040-C015-9, Edition 11.2017