Configuring the system specifically for the client
6-214 Service Manual
Table of the System’s Programming Codes
Flash Detection
Time
131 Extension 001 to 250 (in 10 ms
cycles)
# instead of
extension
035 - Portu-
gal, Argen-
tina and
Thailand
036 - Korea;
028 - Other
countries
Overflow exten-
sion
*
132 1 - No answer
2 - Busy
3 - Wrong number
Extension Automatic Extension 11/
101
Hotline 145 Extension (except 11/101) Phonebook entry
000 to 249 or
∗ - without Hotline
# instead of
extension
∗ - Without
Hotline
Warmline 162 Extension (except 11/101) 0 to 9 seconds # instead of
extension
0 seconds
Assigned Group 151 Executive extension (up to 8) Extensions assigned (up to
15)
or
∗ - to delete
# instead of
extension
None
CD Interface
assignment
(for system tele-
phones)
146 Interface:
HiPath 1120: 01 to 04
HiPath 1150: 01 to 08
HiPath 1190: 01 to 24
or
∗ - to delete
extension # instead of
extension
HiPath1120/
1150:
1st - 11,
2nd - 12, etc.
HiPath 1190:
None
Extension coeffi-
cient
148 Analog extension Line type (Brazil):
1 - 900 ohms
2 - 600 ohms
3 - 900 ohms
4 - 600 ohms
# instead of
extension
1 - Default
extension
Activating external
Message Waiting
Indicator
014
∗ - to enable
# - to disable
Automatic # - to disable
External MWI
group
015 extensionor
∗ - to delete
# instead of
extension
None
Message Waiting
server number
065 MSN number (up to 20
digits)
# instead of
number
None
Collect call barring
by extension
193 extension
∗ - to enable
# - to disable
# instead of
extension
# - to disable
Type of equipment
connected to the
extension
003 extension 0 - Normal (telephone)
1 - Data (Fax/modem)
2 - Answering machine
3 - Music module
4 - External entrance tele-
phone
5 - Voice Mail
# instead of
extension
0 - Normal
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default
To Next Page
Loading...
