Siemens Rapidlab 1200 - Performing a Patient Search; Patient Search Guidelines

2-28 Rapidlab 1200 Operator’s Guide: Operating the System
02087462 Rev. V
Use buttons on the Results screen to perform functions:
If your system is set to Auto Print, the report prints automatically. Refer to Defining Send
System Data Option‚ page 8-26.
Performing a Patient Search
You can search for patient data using the following criteria:
• Patient ID
• Last Name
• Accession Number
• Operator ID
• Start Date
•End Date
Patient Search Guidelines
• Each criterion, except Start and End Date, must first be enabled in Setup.
• Multiple criteria can be selected simultaneously.
• Results are returned only if patient records meet all entered criteria.
• Results for multiple patients are returned if multiple patients meet the entered criteria.
• Start and end dates are always available as patient search criteria.
• If Exact Match is selected and the field associated with Exact Match is blank, results
are only returned for patients for whom that criterion field is blank.
To do this... Then select...
View results for more parameters,
More Results.
Send the report to a data management system or an LIS,
Send.
Print the report, the Print button.
If you want to enable... Then...
Patient ID or Last Name
a.
Select Setup > Sample > Patient
Demographics.
b.
Select one or more criteria.
c. Select Save.
Accession Number or
Operator ID
a.
Select Setup > Sample > Sample
Demographics.
b.
Select one or more criteria.
c. Select Save.