Rapidlab 1200 Operator’s Guide: Maintenance 5-63
02087462 Rev. V
Viewing Maintenance Task Details
The following information is available on the Details screen:
• Description
•Next Due
• Last Performed
This area is blank if the selected task is “As required.”
• Frequency
To view maintenance task details, perform the following steps.
1. Select Status > Maintenance > Schedule.
2. Select the maintenance task you want to view.
3. Select Details.
Change System Time for Daylight Saving Time
NOTE: Setting the date on the system clock back (as for daylight saving time)
eliminates all maintenance completions performed within that hour.
For instructions on setting system time, refer to Setting up the Date and Time‚
page 8-20.
To Next Page
Loading...
