Rapidlab 1200 Operator’s Guide: Safety Instructions A-3
02087462 Rev. V
Protecting Yourself from Barcode Scanner Lasers
When using a hand-held barcode scanner, always observe the following
precautions:
• Never look directly at the beam of a hand-held barcode scanner.
• Never point the scanner at another person.
• Do not look at the reflection of the beam from a shiny surface.
Protecting Yourself from Electrical Hazards
When using Rapidlab 1200 system, always observe the following precautions:
• Do not operate the system in the presence of flammable anesthetic mixture
with air, O
2
, or nitrous oxide.
The risk of explosion exists in a potentially explosive environment.
• If you use an adapter, ensure the grounding wire is properly connected to a
permanent ground.
The system uses a grounded external power cord for connection to a grounded
electrical outlet.
To Next Page
Loading...
