Rapidlab 1200 Operator’s Guide: System Configuration 8-35
02087462 Rev. V
Setting up Secured Options
The secured options screen allows you to determine the level of access to the
system and set up the level of access for individual operators.
The security access for the system and the level of access assigned to individual
operators together determine which functions an operator can access and which
functions an operator can access only with a password. When you select
Restricted access, the system displays the Sign In screen instead of the Analysis
screen when the system is idle. Operators must enter a password to display the
Analysis screen. If an operator is given a level that cannot access a function, a
message appears indicating that the operator cannot access the feature.
Setting up System Access
You can select the security access you want for the system:
• Restricted access
Operators must enter a password to use the system.
• Limited access
Operators can perform routine tasks, such as analyzing samples, without
entering a password.
• Unrestricted access
Operators can perform routine tasks without entering a password and
Operators can access the Setup options.
Use this screen to select the level of system access:
1. At the Setup window, select Secured Options > System Access.
2. Select the level of system access:
Restricted, Limited, or Unrestricted.
3. Select
Save.
Setting up Operator Security Levels
The security access for the system and the level of access assigned to individual
operators together determine which functions an operator can access and which
functions an operator can access only with a password.
The following table contains the level and password status for each function. To
set up Operator IDs and Security Levels, refer to
Defining Operator IDs and
Passwords‚ page 8-37.
To Next Page
Loading...
