6-44 Rapidlab 1200 Operator’s Guide: Troubleshooting
02087462 Rev. V
Using the Sensors Screen
The Sensors screen has two print buttons:
• Last Cal
• Measurement
The Last Cal report contains data for each sensor from the last 2-point or full calibration.
The report provides the system ID, the date and time of the report, and sensor data in the
order represented in
Table 6-6.
The Measurement report contains a measurement of readings for all the sensors.
For information about printing the Last Cal or Measurement report, refer to Performing
Tests and Printing Diagnostic Reports‚ page 6-34.
Table 6-6 Last Cal Report Values
Row number Sensor
1pH
2 pCO
2
3 pO
2
4
Na
+
5
K
+
6
Ca
++
7Cl¯
8Glu
9Lac
To Next Page
Loading...
