Siemens Rapidlab 1200 - Viewing the Sample Totals

7-4 Rapidlab 1200 Operator’s Guide: File Management
02087462 Rev. V
3. Copy the data:
Viewing the Sample Totals
Sample totals include the following information:
• Total number of patient analyses and QC analyses (from QC samples that are not
barcoded) for the system
• Number of patient analyses for each parameter
The system does not include Required QC samples, AutomaticQC samples, and any other
QC samples that are barcoded in the sample totals.
Use the following steps to view the sample totals:
1. Select Recall > Sample Totals.
2. You can select
Print to print the sample totals.
3. Select
Return.
If you are
copying data... Then...
to CD,
a. Select
CD.
b. When prompted, insert the CD into the drive and select
Continue.
c. When prompted, remove the CD from the drive and select
Continue.
d. Select
Return.
to email,
a. Select
Email.
When the system finishes copying data, the system displays
the System Data screen.
b. Select
Return.
to diskettes,
a. Select
Diskettes.
b. When prompted, insert the first diskette into the drive and
select
Continue.
The system displays the number of diskettes required on the
screen.
c. When prompted, remove the diskette from the drive, insert
the next diskette in the sequence, and select
Continue.
d. Continue removing and inserting diskettes as prompted.
e. Select
Return.