Siemens Rapidlab 1200 - Importing and Exporting Maintenance Activities

8-46 Rapidlab 1200 Operator’s Guide: System Configuration
02087462 Rev. V
Importing and Exporting Maintenance Activities
1. At the Setup screen, select Secured Options.
2. Select the down arrow button and then select
Maintenance.
If you want to... Then...
Import maintenance
Data from a disk or CD
a. Select
Import Schedule.
b. Insert a disk or CD in to the drive.
c. Select Disk or CD.
Schedule information is copied from the disk or CD.
d. When prompted, remove the disk or CD from the drive.
Export maintenance
Data to a disk or CD
a. Select
Export Schedule
b. Insert a disk or CD in to the drive.
c. Select Disk or CD.
Schedule information is copied to the disk or CD.
d. When prompted, remove the disk or CD from the drive.