Siemens Rapidlab 1200 User Manual

E-30 Rapidlab 1200 Operator’s Guide: System Specifications
02087462 Rev.V
Rapidlab 1260 System Performance Characteristics
All performance data presented in this section was generated using the Rapidlab 1260
system. The system performed calibrations using the default settings recommended by
Siemens for optimum performance. All reported values were corrected to 760
mmHg. All
data was collected at room temperature (about
23°C). You should determine your own
performance characteristics in your laboratory with your Rapidlab
1260 system.
Precision on Controls
Quality control materials, including manual (QC) and automatic (AutomaticQC) were
analyzed on the Rapidlab 1260 system. Manual QC is performed by the operator while
AutomaticQC is performed automatically by the system based on the QC frequency
defined in the system software. The results are presented here.

Siemens Rapidlab 1200 Specifications

General

Brand	Siemens
Model	Rapidlab 1200
Category	Medical Equipment
Language	English