1-6 Rapidlab 1200 Operator’s Guide: System Overview and Intended Use
02087462 Rev. V
The latch assembly has 4 connections that secure the cartridge to the system. The
connector connects the AutomaticQC manifold and AutomaticQC cartridge. The support
bracket connects to the bracket on the cartridge.
Figure 1-5 AutomaticQC Cartridge System Interface
The AutomaticQC manifold creates the fluid path for AutomaticQC materials to flow to
the sample entry components in the reagent cartridge.
Figure 1-6 AutomaticQC Manifold
1 Latch assembly
2 Support bracket
3 Connector
1 AutomaticQC manifold
To Next Page
Loading...
