1-8 Rapidlab 1200 Operator’s Guide: System Overview and Intended Use
02087462 Rev. V
Waste moves from the measurement module through the pressure detector bubbler, and
into the reagent manifold. Waste moves through the reagent manifold and into the waste
bottle.
Figure 1-8 Waste Path
The waste bottle housing protects the waste bottle. The waste detector detects the presence
of the waste bottle and also detects when the bottle is approaching its capacity. The system
alerts you when the waste bottle is between 70 and 100% full. To reduce exposure to
biohazards when you remove the waste bottle, the system prevents fluidic operations from
starting.
1 Path from the measurement module to the reagent manifold
2 Path from the reagent manifold to the waste bottle
To Next Page
Loading...
