Rapidlab 1200 Operator’s Guide: Index I-1
02087462 Rev. V
Index
A
accessing
setup menu 8-1
air filters
checking 5-9
replacing 5-9, 5-20
alphanumeric characters
selecting to enter for patient ID field in setup 8-10
alveolar-arterial oxygen tension difference
description 1-60
analysis screen
custom panels 2-20
sample options 1-22
selecting QC sample type in setup 8-13
selecting the sample type in setup 8-13
analytical range limits 8-40
analyzing patient samples
a-v study report 2-35
capillary 2-12
CO-ox Only 2-18
entering patient sample data 2-22
microsamples 2-14
pH Only 2-17
analyzing QC samples 4-1
AutomaticQC 4-3
high G/L 5-3
required QC 4-4
analyzing samples
syringe 2-11
anion gap
description 1-59
AQC cartridge
reinstallation 2-4
AQC valve test 6-41
arterial-alveolar oxygen tension ratio
description 1-60
arterial-venous (a-v) Study
description 1-61
arterial-venous oxygen content difference
description 1-62
authorized representative B-1, B-9
automaticQC 4-3
change target ranges to default 8-6
repeat analysis for failed parameter 8-5
retaining target ranges 8-6
selecting setup options 8-3, 8-5
automaticQC cartridge
capacity 1-4, 1-5
contents of levels 1-4
eject cartridge 6-43
automaticQC manifold
replacing 5-19
automaticQC ranges
retaining 8-6
automaticQC samples 4-3
a-v extraction index
description 1-62
a-v study
description 1-61
report 2-37
B
bar code
problems 6-8
scanning patient ID 2-23
bar code scanner
bar code symbologies 8-24
connecting the bar code scanner 8-26
defining the patient ID, accession number, and pass-
word bar codes 8-23
entering fixed lengths for Interleaved 2 of 5 8-24
resetting 6-9
troubleshooting 6-8
barometric sensor
calibrating 5-3
base excess
description 1-54
bicarbonate ion
description 1-54
biosensor
replacing sensor 5-29
buttons
functions of buttons 1-21
C
calcium adjustment for pH
description 1-59
calcium sensor 1-45
calcium, ionized
measuring 1-44
calibrating
barometric sensor 5-3
touch screen 6-35
waste detector 6-35
calibration 3-1
calibration points for reagents 1-9
defined 3-1
effect of turning parameters off and on 8-14
features of system 3-3
recalling results 3-4
report 6-5
report examples 3-3
troubleshooting failed 6-4
understanding automatic 3-1
viewing and printing data 7-4
calibration message
selecting in setup 8-41
calibrations
troubleshooting failed 6-4
calibrator traceability E-73
capillary samples
To Next Page
Loading...
