ECDIS-E User Guide Appendix A - Chart Installation
65934012 A-7
5. With the permit file selected install the file by clicking the Scan
Drives button in the Install tab folder.
Installing NAVTOR Charts
NAVTOR supplies two types of CD/DVD media; BASE and UPDATE If
both are provided in the same delivery or if chart loading is to be performed
for the first time, the BASE media MUST be loaded first and the UPDATE
media second. If you are using NavSync, both BASE and UPDATE charts
are contained on the NavStick.
To install NAVTOR charts do the following:
The chart installation process described below is identical for BASE,
UPDATE and USB media.
1. Insert the ENC chart CD/DVD or NavStick into your `ECDIS 1’ PC.
2. Verify that the required chart permits have been installed and that
the certificate file is correct as described previously.
3. On the Chart Installation window tick the Import S57/S63 check
box and click the Launch ChartHandler button. An `Action
Required' popup window appears requesting confirmation of chart
deactivation. Click the OK button to confirm.
4. The installation of NAVTOR charts from the ChartHandler is the
same as described previously for installing S57/S63 charts.
To Next Page
Loading...
