Sperry Marine VISIONMASTER FT ECDIS-E - Editing a Route; Edit Route

ECDIS-E User Guide Routes
65934012 8-9
Editing a Route
Edit Route
The Edit Route sub-menu includes the following tab folders:
 Route
 WPT (Waypoints)
 CPs (Critical Points)
 Dngrs (Dangers)
Internal route are opened, saved, validated and managed from the Route
tab folder.
The WPT tab folder enables all the route's attributes (waypoint, leg and turn
data) to be edited.
The CPs tab folder allows the operator to insert alerts, in the form of alarms
and warnings, along a route.
The Dngrs tab folder lists objects and areas that could endanger the safety
of own ship on the route currently opened from the Route tab.
The Dangers tab will only appear if Safety Checking has been
selected in the system configuration. Refer to Chapter 5
`Configuration' in the VisionMaster FT Ship's Manual 65934011.