Sperry Marine VISIONMASTER FT ECDIS-E - Chapter 2: Getting Started with ECDIS-E

ECDIS-E User Guide Preface
iv 65934012
PREFACE
ABOUT THIS MANUAL
The structure of this manual and the design of the pages can help you to
find the information that you need. Consistent presentation techniques are
used throughout the manual, to make it easy to use.
The features, functionality and capability which are described in
this manual may not necessarily be present in all versions or
configurations of the VisionMaster FT ECDIS-E system
This manual is intended for an operator using the VisionMaster FT ECDIS-
E and is divided into the following chapters and appendices:
Chapter 1 - Overview
Chapter 2 - Getting Started with ECDIS-E
Chapter 3 - Basic Operation of ECDIS-E
Chapter 4 - Charts
Appendix A - Chart Installation
Appendix B - Chart Datum Codes
Chapter 5 - Navigation Tools
Chapter 6 - Sensor Management
Chapter 7 - Alerts
Chapter 8 - Routes
Chapter 9 - Targets
Chapter 10 - Electronic Range and Bearing Lines
Chapter 11 - Brilliance
Chapter 12 - Conning information Display
Chapter 13 - System