Sperry Marine VISIONMASTER FT ECDIS-E - Chapter 1 Overview; Hardware Configurations

ECDIS-E User Guide Overview
65934012 1-1
Chapter 1 Overview
System Overview
Hardware Configurations
The ECDIS-E consists of one of the following hardware configurations:
 a single node comprising one VisionMaster FT Panel PC and a
trackball interface, which is connected to the PC.
 a two node system, where two VisionMaster monitor/panel PCs are
connected so that data input to one node is available to the other.
Either a single or two-node configuration will interface with the following
sensors which provide sensor data:
 Gyrocompass
 Speed Log
 GPS
In addition a further serial port can provide AIS target data, or if required,
external radar target data or depth sensor data.