ECDIS-E User Guide Getting Started with ECDIS-E
65934012 2-19
System Shutdown
To shut down one node, select Shutdown System at that node in the
System menu (see Shutdown) and wait for the VisionMaster FT application
and the Windows operating system to power down. To shut down both
nodes select Shutdown All Systems.
A prompt appears requesting a confirmation of the shutdown to be entered,
see Shutdown for details.
When the software has fully powered down the ON/OFF button changes to
red.
CAUTION:
Do NOT press the ON/OFF button before the application has fully
powered down.
To Next Page
Loading...
