Targets ECDIS-E User Guide
9-20 65934012
Auto Drop Targets
This area enables auto drop targets to be enabled and the auto drop range
to be adjusted, for information see Auto Drop Targets.
Other
The Vector Timeout check box should be ticked to ensure that the vector
True/Relative setting matches the Trails mode after the vector timeout of 30
seconds, see Vector Modes. If the check box is not ticked and the vector is
different from the Trails mode the Vector will not change and the value will
remain in amber.
Number of Targets
The Number of Targets area includes data all system targets processed on
the node.
To Next Page
