Sperry Marine VISIONMASTER FT ECDIS-E - Page 267

ECDIS-E User Guide Alerts
65934012 7-11
Alert Type
Description
Priority
Notes
Absolute Humidity
Unusable
Sensor Absolute Humidity Integrity VisionMaster FT
Alarm or
Caution
Depending on
configuration
Active AIS Almost Full
Activated AIS Target Limit Almost Reached
Caution
Active AIS Full
The number of AIS target limit has been reached
Warning
AIS Communication
Failed
Communication with the AIS unit has failed. AIS targets are
not available.
Warning
AIS Degraded
AIS degraded because DR'ing
Warning
AIS Disabled
Ownship position is being dead reckoned, datum is invalid or
Ownship heading is unusable.
Warning
AIS Full
The number of AIS targets exceeds system capacity. AIS
targets that are furthest away will not be displayed
Warning
AIS Exceeds Capacity
The number of AIS targets exceeds system capacity
(maximum 250). AIS targets that are furthest away are not
displayed.
Warning
AIS Interface Failure
An interface with the AIS unit has failed
Warning
AIS MMSI Mismatch
Expected AIS transceiver MMSI {0}, actual VDO MMSI {1}
Warning
AIS: Integrity Error
Alarm generated by AIS hardware
Warning
Anchor drag
Possible anchor drag detected. Ship is farther from the
anchor drop location than the specified anchor chain length
allows.
Warning