STC micro STC8A8K64D4 Series - Send out the Data in EEPROM Using UART

STC8A8K64D4 Series Manual
- 460 -
MOV P5M0, #00H
MOV P5M1, #00H
MOV DPTR,#0400H
LCALL IAP_ERASE
MOV DPTR,#0400H
LCALL IAP_READ
MOV P0,A ;P0=0FFH
MOV DPTR,#0400H
MOV A,#12H
LCALL IAP_PROGRAM
MOV DPTR,#0400H
LCALL IAP_READ
MOV P1,A ;P1=12H
SJMP $
END
16.4.3 Send Out the Data in EEPROM Using UART
C language code
//Operating frequency for test is 11.0592MHz
#include "reg51.h"
#include "intrins.h"
#define FOSC 11059200UL
#define BRT (65536 - FOSC / 115200 / 4)
sfr P0M1 = 0x93;
sfr P0M0 = 0x94;
sfr P1M1 = 0x91;
sfr P1M0 = 0x92;
sfr P2M1 = 0x95;
sfr P2M0 = 0x96;
sfr P3M1 = 0xb1;
sfr P3M0 = 0xb2;
sfr P4M1 = 0xb3;
sfr P4M0 = 0xb4;
sfr P5M1 = 0xc9;
sfr P5M0 = 0xca;
sfr AUXR = 0x8e;
sfr T2H = 0xd6;
sfr T2L = 0xd7;
sfr IAP_DATA = 0xC2;
sfr IAP_ADDRH = 0xC3;
sfr IAP_ADDRL = 0xC4;
sfr IAP_CMD = 0xC5;
sfr IAP_TRIG = 0xC6;
sfr IAP_CONTR = 0xC7;
sfr IAP_TPS = 0xF5;