STC micro STC8A8K64D4 Series - Page 597

STC8A8K64D4 Series Manual
- 581 -
#include "intrins.h"
sfr SPSTAT = 0xcd;
sfr SPCTL = 0xce;
sfr SPDAT = 0xcf;
sfr IE2 = 0xaf;
#define ESPI 0x02
sfr P0M1 = 0x93;
sfr P0M0 = 0x94;
sfr P1M1 = 0x91;
sfr P1M0 = 0x92;
sfr P2M1 = 0x95;
sfr P2M0 = 0x96;
sfr P3M1 = 0xb1;
sfr P3M0 = 0xb2;
sfr P4M1 = 0xb3;
sfr P4M0 = 0xb4;
sfr P5M1 = 0xc9;
sfr P5M0 = 0xca;
sbit SS = P1^0;
sbit LED = P1^1;
sbit KEY = P0^0;
void SPI_Isr() interrupt 9
{
SPSTAT = 0xc0; //Clear interrupt flag
if (SPCTL & 0x10)
{ //Master mode
SS = 1; //Pull up the SS pin of the slave
SPCTL = 0x40; //Reset to slave and standby
}
else
{ //Slave mode
SPDAT = SPDAT; //Transmit the received data back to the master
}
LED = !LED; //Test port
}
void main()
{
P0M0 = 0x00;
P0M1 = 0x00;
P1M0 = 0x00;
P1M1 = 0x00;
P2M0 = 0x00;
P2M1 = 0x00;
P3M0 = 0x00;
P3M1 = 0x00;
P4M0 = 0x00;
P4M1 = 0x00;
P5M0 = 0x00;
P5M1 = 0x00;
LED = 1;
KEY = 1;
SS = 1;