Stoll CMS ADF-3 - Setting Stitch Tension

Adjusting knitting machine 4
Basic settings 4.1
108
4.1.2 Setting stitch tension
The stitch tension and thus the stitch size depend on the stitch cam values.
It is possible to specify either the stitch tension as an absolute value or the
stitch length.
Explanation Value range
NPK Correction for all stitch cams Minimum value: -2
Maximum value: 2
Step width: 0.05
NP1 -
NP100
Stitch cam position 1 to 100
Value Stitch length in NP values or mm
Value [mm] Specification in NP values. Minimum value: 6.5
Maximum value: 22.5
Step width: 0.05
Value [mm] Settings in millimeters.
Setting the yarn length per stitch (Yarn
Length Control).
Minimum value: 2.20
Maximum value: 33.00
Step width: 0.01
Comment Comment ASCII Characters