127
4 Adjusting knitting machine
4.1 Basic settings
4.1.11 Setting counters
In addition to the piece counter and the cycle counters, there are also other
counters. On the one hand, they can be used in the knitting program, e.g.
to request conditions. On the other hand, they indicate various machine
states.
Setting counters:
1. Call up the "Cycle counters & counters" window.
2. Call up "Additional function keys".
3. Tap the key for the desired counter group.
4. Set counter to the desired value.
5. Call up "Main menu".
Key Function
Call up the "Cycle counters & counters" window
Call up "Additional function keys"
Call up desired counter group
Call up "Main menu"
Buttons for setting the counters
To Next Page
Loading...
