Adjusting knitting machine 4
Basic settings 4.1
124
4.1.9 Setting Cycle Counter and Quantity of Fabrics
The cycle counter specifies how often a pattern area is to be repeated.
Which cycle counter controls which pattern area is defined in the knitting
program.
The piece number specifies how many pieces are to be knitted. During
production, the piece number is decreased by "1" as soon as a complete
piece has been produced.
Setting cycle counter and piece number:
1. Call up the "Cycle counters & counters" window.
"Cycle counters & counters" window
2. Set the cycle counters "RS1" to "RS19".
3. Set the piece number.
4. Confirm entries.
5. Call up "Main menu".
Key Function
Call up the "Cycle counters & counters" window
Confirm entries
Call up "Main menu"
Keys for adjusting the cycle counter and the piece number
To Next Page
Loading...
